The range of Onga LTP Lesuiretime swimming pool pumps has been purposefully designed to provide maximum performance and corrosion resistance at a realistic cost.
- Ideal for small to medium domestic swimming pools and solar pool heating.
- 2 year warranty
Applications:
- Swimming pools from 20,000 litres up to 90,000 litres.
- Solar heating circuits.
- Above ground pools.
Features & Benefits
- IP55 (TEFC) motor – with IP55 protection from dust and water the LTP pumps are preserved
- Electrical approvals-the LTP series pool pumps have passed all stringent Australian standards AS/ NZS3136:2001 for safety and is approved for installation within the wetted zone of the pool area, approvals V99108, V02301, V02302.
Operating Conditions
Suitable for pumping clean non-aggressive liquids without solids or fibers in suspension.
Fluid |
Water |
Maximum working pressure |
270 kPa |
Water (Swimming Pool) temp range |
5ºC-35ºC |
Ambient temperature |
50ºC maximum |
MOTOR |
|
Type |
TEFC 2 pole continuously rotated |
Nominal speed |
2800 rpm |
IP rating |
IP55 |
Insulation class |
Class F |
Thermal overload |
Inbuilt auto reset |
Temperature rise |
Class B |
Frequency |
50Hz |
Voltage |
230º-240º |
Bearing type |
Deep groove ball bearing with double contact lip seal |
Bearing temperature rating |
150ºC |
MATERIAL |
|
Component |
Material |
Pump casing |
20% glass filled with ABS |
Clacker |
20% glass filled with polycarbonate |
Impeller |
20% glass filled with ABS |
Baffle |
20% glass filled with ABS |
Drain plug |
20% glass filled with ABS |
Diffuser |
20% glass filled with ABS |
Basket |
Polypropylene |
Shaft sleeve |
Nylon |
Motor shaft |
400 series stainless steel |
End shield |
Powder coated cast iron |
Hair and lint pot O-ring |
Low friction nitrile |
Cord/Plug |
Nitrile |
Mechanical seal, 1/2″ type 6 (LTP1100 = type 6 3/4″ |
|
Flexible bellows |
Nitrile |
Stationary face |
Ceramic |
Rotating face |
Carbon |
Spring |
304 stainless steel |